3M™ Fiber Gasket L-149-10, 4-1/2 in x 5-1/4 in 10/Case
This gasket, 4 1/2 inches x 5 1/4 inches is part of the welding lens stack. It is placed between the cover plate and the glass shade lens to prevent glass breakage due to heat buildup. The gasket is not used with the electronic lens.
3M™ Filter Lens Retaining Clip 061-36-01R01 (1/Case) is used on 3M™ Breathe Easy™, Airstream™ and Supplied Air Welding Helmets. It is part of the filter lens assembly.
3M™ Flow Meter Adapter L-181 1/Case
This adapter determines airflow for the 3M™ Headgear L-Series and the GVP Series Powered Air Purifying Respirator (PAPR)s.
3M™ Foam Liner L-163 1/Case
Used on the 3M™ L-Series Headgear L-700 and L-900. It is installed into the headgear shell before the head suspension is installed. With this foam liner, the headgear is ANSI Class I, II approved for top and side impact.
3M™ Head Seal Kit L-165 1/Case
Used on the 3M™ L-Series Bumpcap L-500. It is used to help prevent leaks around the headgear. The seals are installed into the bottom edge of the headgear and should not be removed unless they need to be replaced.
3M™ Hook and Loop Fastener Set 061-68-04R01 (1/Case) is a replacement part used on the neck protector on welding helmets for 3M™ Breathe Easy™, Airstream ™ High Efficiency and Supplied Air Systems.
3M™ Inner Cover Plate 522-01-12R01 1/Case
This plate is a replacement part for the autodarkening lens that is used on 3M™ Breathe Easy™ and Supplied Air Welding Systems.
Default
3M™ Fiber Gasket L-149-10, 4-1/2 in x 5-1/4 in
